To use the CAFL list you need a frequency generator. Zappers are fixed to specific frequencies, unless you have modified yours, but that would make it a typical frequency generator then.
What do you use for sending CAFL frqs through zappicator?
It is really fascinating as it provides another option for wireless transmission of the frqs.
>>> She also wrote of parts in your body that turns southerly at night and then positive during the day.
Which book of hers does cover that topic?
I have a skin condition which is related to dermatitis, so your example of treating eczema is interesting, as it is a form of dermatitis.
So, I see you use the zappicator and electrodes at the same time. Good to know, thanks.
It would be great to know how you connect your frqs generator with the plate zapper and zappicator?
I use a zapper that i changed to frequency generator. I made it a little more powerfull it gives about 8V on the electrodes, so now the batteries voltage can drop to 5 volt and then only is it weaker then other zappers. She wrote in the book prevention of all cancers about the changing polarities. Thats also the book if you want to get into plate zapping and homeopathy, which takes you to a whole new game. Read the book the memory of water first otherwise you won't understand or believe it. Even the bible states when your baptised your name gets written in the water and the water will witness. Now i have two plates next to each other in line with pos lead, i made a port after the plates where the speaker attached. The only way to test that this work is the syncrometer. And it does. Again it maight not kill anything but it does give the energy of that you want.
Tactile transducers are just a bunch of magnets with a coil placed specifically. It is like a speaker (magnet+coil). So, you don't need a lot of power to drive it.
The main problem is the magnet in tactile transducers is facing you with its positive side (South), which is the opposite for the zappicator.
That is why you can't use it, unfortunately.
If you can find a tactile transducer that has magnets placed in such a way that their negative side faces you, then I don't see what you can't use it like a North Pole speaker... (?)
It is just my opinion and I haven't tried it myself. I have two transducers and will check their polarity as soon as I get a compass.
How would you do that? Please give your examples...
I know that Hulda said no metal on top of the zappicator... so, if (theoretically) I make the zappicator using the South Pole speaker (or transducer) and then instead of using it for food/water will use it for some metal objects, then the magnet might change its polarity....
After that I will be able to use it for food/water/body, etc.
I build a bob beck magnetic pulsar, and again you use the nagative side of the electro magnet on your body, so when you test this electro magnet and accidently test the wrong pole it will change the polarity of the compass, then you zap it again and the compass would be 100% again, so imagine figuring this north / south story out and your compass changes polarity.
I have finally got a compass today and checked my transducers and small external computer speakers. All of them appeared to be the North Pole ones, as required for the zappicator.
So, I am playing with the transducer now. Will leave speakers for later. They were cheap and always can just order another set.
So, can you suggest what I should look for when using it on the body? I just need to find out ways to see whether it is working or not...
if i were you i would start by setting the frequency to 1.6 mhz and put a small radio on AM and see if you can tune it to your zapicator. Then make notes how far the signal stays clear. Now compare diffirent speakers
Have you managed to produce die off with a zappicator ?
I have tried the one of Arthur Doerksen a few years ago and it has not produced any die off...
(What a suc*** i was the past years, i bought all kind of high priced useless devices... I agree with you, it is better to understand the tech, i feel better now)