CureZone
Old Format -> CureZone.INFO
How to make your own Colonic Board!!!!!!!!!
Forum: Ask Andreas Moritz Forum  
  • How to make your own Colonic Board!!!!!!!!!   Robbie   11y  8,718  
    This is NOT my avatar. This is just randomly assigned image, until I upload my own avatar. Click here to see my profile.
    Robbie
    Date: 9/7/2003 3:12:57 AM   ( 11y ago )   Hits:   8718
    Hi everyone & Andreas,
    After leaving this forum I was searching through the enema/colonics forum and found this post by a ever so wonderful person on how to make your own colonic board and it's PERRRRRRFECT for some of us who can't afford at this time to buy one at the going price and PERRRRRFECT for us who can't afford to be without one after flushing our livers. I will start making one right away as I live right across the astreet from Home Depot and around the corner from Lowe's and Ace hardware. Is'nt that ironic? I can walk to all of these stores! Wow thank God, He always make a way for us in the mits of adversity. I love him! I'm sooooo happy Andreas!
    Robbie

    Subject: HOW TO MAKE YOUR OWN COLONIC BOARD!!!!!! :) :) :) (long post)
    From: resting < no email > | Show All messages posted by resting |
    Date: 11:45 Jun 17 2003 (3 mon)


    hey guys. i too am in your same position...i can't afford to buy a colema board for $200, so i made my own, for pretty cheap too. here are some instructions for you guys to make your own board!

    places to shop:

    home depot, lowes, ace hardware (any hardware shop), walmart, etc...

    some materials you need:

    1) 45" x 22" wooden board ($7 from home depot...you can get a bigger/smaller size if you want, just depends on what your height is)
    2) old bed sheet (free if you have one!)
    3) vinyl siding (1 yard is $1.98
    4) cheap white garbage bags
    5) 5 gallon bucket (or you can buy two of them, seeing one of them could be your head support for the other side of the toilet, seeing that most toilets are about the same height at a bucket is)
    6) tubing set (can be as expensive as $40+ or cheap for a few bucks from ace hardware...but if you do get some cheap plastic tubing from ace, you will have to buy the rectal tips from some place online or wherever they are sold, which are pretty cheap, and make sure they fit the end of the tubing...and you might want to get a siphoning syringe, which comes in a normal tubing set, to get the water flow moving...)
    7) some kind of saw to cut a hole in it to fit over a toilet (if you dont have one, ask a neighbor to help you...i think my hole was measured something like 10" x 12"...)
    8) some type of splash guard (get creative!)

    now, if you don't mind spending around $60 for a board, i would recommend that you just buy the tubing kit online for the normal colema boards, which is around $40 plus shipping (which is what i did). now, if you want to be really thrifty, you can go to a place like ace hardware and just buy some plastic tubing stuff. i didnt even know that ace carried plastic tubing until a few days ago, and its very cheap too, around $1-2 bucks a yard or so (i think?).

    after i bought the wooden board, i had my dad help me cut a hole in it and take a few inches off the back end, because it was a little too long to fit in my bathroom. next, i found an old black bedsheet, to wrap around the board, and just duct taped it to the bottom part of the board. you could even put an old blanket around the board if you think it would fit, just so you have some extra padding and comfort. then i took some of the plastic vinyl sheet i bought from walmart (located in the arts and crafts area) and stretched it over the board, and taped it to the back. 1 yard of the vinyl should be plenty, but you might want to get 2 yards just in case you want to use it for something else.

    so now we have the board all nice and shiney :) now its time to figure out what to do with the plastic tubing!!!!!! now, you are gonna need some type of splash guard so you can wrap the garbage bags around them for easy cleanup purposes. what i did was just buy a sample of this vinyl type flooring from lowes or home depot, and nailed it to the board so that i could cut out a little hole to stick the tubing in. it looks a little funny on the board but it works great! after you cut a tiny little hole in the board (where the rectal tip area will be coming out) just put the tubing on, siphon the hose, and you are ready to go. if you want to be able to make the board even more portable (like to be able to do colonics in your room) i would suggest getting a total of (3) 5 gallon buckets, one to put under the poopin hole, the other for body support, and the other for the water. also, when you do the home colonics, make sure the bucket is a 3 or so feet above your board, just so you get a faster water flow happening.

    i hope this helps you guys!!! if you have any questions, just ask away.

     
    Printer-friendly version of this page
    Email this message to a friend
    Bookmark this page/Add to Favorites or press Ctrl+D
    Alert Webmaster & Moderators
    Report Spam or bad message  Alert Moderators on This GOOD Message
    How do you feel about this message?     Like     Dislike       Hide this question

    2 readers agree with this message.  Hide votes     What is this?
    How do you feel about this message?     Like     Dislike       Hide this question

    Find & Order All Messages Posted by Robbie
    by
    DISCLAIMER




 
Medianet Ads


 

Donate to CureZone


Guest Book - Liver Flush FAQ - News - Link Exchange - Add URL - How To Exchange Links? - About Global Directory

Terms of Service - Privacy Policy - Spam Policy - Disclaimer - Guidelines & Rules - Forum Trolls - Fair use notice

Homepages:  Owen - Wrenn - Maya


CureZone Newsletter is distributed in partnership with www.netatlantic.com


Contact Us - About - Sponsors - Stats



Copyright 2014  curezone.com


fetched in 0.76 sec at 12/18/2014 7:33:18 PM, requested by 54.211.34.105, referred by http://curezone.com/forums/fm.asp?i=605281 , requested 1 pages during this session, y=3