Re: MiniFG thoughts?

The frequency generator I had previously refered to but forgot to post the link is here:

http://www.ntscope.com/m1-8.html
Electrodes for the Madell 20mhz fg are pictured at bottom if you wanted to use it as a contact device. Similiar machines can cost 2x as much.

20 MHZ output frequency generator-
sine,square,triangle,pulse waves available
Positive DC offset possible 5 volts
Rise/fall times on the wave are under 17 nanoseconds (variable)
Programming in sweeps between given frequencies and for a given duration of time should be no problem. But ask Madell. Of course Robin's f160 makes childs play of this. Extreme specifications are possible with an f160. Can't wait to see exactly how Dave Trebing is going to use this with his new plasma tube machine and what max freqs will be possible. Looks like a ver high multi mhz carrier will be possible. Research is complete and in design phase.

The Madell fg is at least $100 less than the mini fg ut not as near portable (mini fg is wearable too). As far as functionality, there can be no mistaking that the Madell 20mhz fg is far and away is a completely different class if you look deep into the specs. Know this, try function/frequency gens are made for ENGINEERING and therefore have strict quantifiable specs that are also published. With a serious users manual to boot. For Pete's sake, their for the purposes of serious "Bench Work." On the other hand the mini fg and devices like it are made for the general populace which typically don't have a great understanding of electronics/engineering/electricity.

Anyone and everyone knows what I feel is an incredible value if one seeks a "signal source" component/fg to provide the freqs in a plasma setup.....the f160 2 channel device. Atelier's other fgs are also 2 channel but do not put out voltage, have lower max freq output, etc. Still awesome and even cheaper. The f160 is obviously an incredible stand alone fg for contact use as well. I've talked with Robin many times and begged him for several things. With the addition of other voices, he'll have some pretty sophisticated equipment possibly next year. What he has released recently is what several of us had asked for which is a power amplifier to raise the f160 voltage. Consult his site.

Vtool, thank you for the kudos. You are deserving of more with your humble research.

Vtool, Ron says he has acheived a "true Rife Effect". Wow, with all due respect to an accomplished healer, there would be many Rife researchers that would pay and enjoy seeing Ron "blow a bug" under a mic. I sure know James Bare would have a watchful eye on the microscope to see if Ron could actually shatter a microbe as James has proved....and Scoon by accident. Wow, if anyone has researched the "Rife Effect", you know these are lofty claims. I am NOT disparaging Ron, simply would love proof of this phenomenon.

Hey Steve555...you said """Thanks everyone. I would love to get a real Rife machine like the GB4000 or maybe one of Bruce Stenelsons machines and an LBG and a Molecular Enhancer and the list goes on. But you have to go with what the pocketbook allows."""

The GB4000 is not a Rife machine technically. It is a John Crane and to a MUCh lesser degree John Marsh manifestation. Both 1950's researchers that encouraged Rife to get a grip and to get back into the game. For the most part Crane changed amny many many aspects to Rife's equipment for several reasons beyone the scope of this thread. Yes, he did initially stick with plasma tech, but I elieve quickly changed to contact electrodes. Long story short, a device like the Madell 20mhz fg is essentially what he came up with and was selling for many years at I believe conferences in the Hilton(?) hotels. Difference is, today's fg's are much more precise, etc. He may have used a signal amp...not sure but we do know this is not nexessary at all for results. Annunaki has rightly pointed out that some cheap components can help keep the square waveform square as it enters the body.

That said, Jeff G. who makes the GB4000 will/has made an add on plasma tube for that device. So you have essentially a rife plasma device at this point.

Bruce S. devices have a loyal following as well as Dr Loyd. These are EMEM devices and are high voltage. They have the same goals as Rife's equipment, but take a different but very similiar road to get there. Some rifers may technically diagree that EMEM devices are truly Rife. Actually, if you want to get down to brass tacks, if a Rife machine doesn't produce the Rife Effect (able to blow away a bug under a microscope at distance utilizing a very exact "coordinative resonant frquency) then it simply isn't "rife." Loosely put, this is waht A. Scoon has claimed and many agree with this. Where does that leave us? James Bare and the Rife/Bare device. Only device proven to blow a bug under a mic. But has it been repeatable? Ask James.

With respect to Vtools great suggestions on Ron's tumor research...
Dr. Holt in Australia has created a HUGE ruckess in Australia. Big big deal here. The news program "A Current Affair" has picked up this mans life story of the last 20 odd years and his ability to cure cancer..typically of tumor origin. He never wanted the attention or to be in tv. The citizens are outraged that the medical community has not invested in Holt's technology and made it available to the citizens. He uses 434mhz (not a misprint) (lightning that is about half the way to microwave..remember our microwave and clark freq convo?) to devitalize the tunors. It is a 3 week program and he can treat 26 people a day. Millions in Australia are lashing out at the gov;t for not only their lack of support, but for their persecution of Holt. His sucess rate is through the roof. People wanted so much of the story, they have been doing multiple TV shows on Holt's work. I'll provide the video links later.

In a nutshell it has many similarities to Rife's work, is painless and has no side effects. The lines outside his office now that the word has hit the news last month are Looooong. The upshot is that wouldn't ya know it, the "allopathic medical establishment" has apparently already answered the puclics frustration and created a similiar device. Both machines working on beam ray technology. They unfortunately didn't do a good job discussing if the beam what ionized plasma or ?. I believe Rife's work was far more powerful when one of his legendary machines were being used from the 30's.

On the subject of "Dirping" (fscan language). There are at very least a couple of companies involved in Rife Plasma Tech that are currently working on resonant frequency scanning for the body. I'll relate that later too. And of course we have the BodyScan 2010 machine, but I know little of it. QXCI as some of this function too.

I want to repeat this thought. Please don't think it is not possible to "wobble" a frequncy with any ordinary off the shelf engineering fg. You can find them dead cheap used on ebay.com. This is called "sweep" in both engineering equipment and with Rifers. Inputting 2 freqs into a fg is possible with a sweep fg. You can have the fg execute every single freq inbetween the 2 lower and higher freqs you started with. You can choose how long in time you want each of the freqs to run as well. Just look at any given fg you are interested in for these "sweep" functions. the f160 running the constantly updated f100 software can do all kinds of things with *2* waveforms simultaneoulsy and 100% modulation. Atay tuned to what Robin is doing. He is quite the programmer and leading Rife Tech into some interesting possibilities.

Rife Plasma tech hasn;t looked this good since Rife's days. Alot of "stuff" being worked on now. The next 5 years can be something special. And maybe, just maybe the public puts the medical field under fire and on notice instead of the other way around.

http://www.ntscope.com/m1-8.html

Alert Webmaster & Moderators Already alerted!  Already alerted!

0 of 0 (0%) readers agree with this message.  Hide votes     What is this?
How do you feel about this message?     Agree     Disagree       Hide this question