CureZone   Log On   Join
Re: I've built my own single 9V dc beck's blood cleaner
gozoo1 Views: 71,041
Published: 15 years ago
This is a reply to # 1,462,444

Re: I've built my own single 9V dc beck's blood cleaner

ok i will change cap in a few hours when the shops open, the test switch is definately momentary on because the LEDs only stay lit when i press the button and then they go off when i let go.

Maybe its the relay because when i turn down the pot it does not make a click, if i hold the test switch the leds dont light when the taper pot is turned all the way to the right, but it does work when its turned all the way to the left, this is with the connections facing down, i think that is also working backwards, ive checked it 8 times for shorts, and also checked the wiring in the same process, the schematic i have is much clearer than the 1 i showed u and i can see those crossing connections which i have checked,i also have the 4 x 1.5 alkaline batteries connection in and plastic connection box and also the 3x 9v batteries too, the light bulb is working, i notice u have 3 connections on your jack plug on yours and also 3 on your taper pot, should i have the same as i only have 2 on each.

i am considering trying yours too but i am afraid of becoming more confused as i cant even figure this 1 out lol.


Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!