CureZone   Log On   Join
Re: I've built my own single 9V dc beck's blood cleaner
gozoo1 Views: 70,361
Published: 14 years ago
This is a reply to # 1,465,064

Re: I've built my own single 9V dc beck's blood cleaner

Ok my friend, my resistors were in parallel as i just connected them as it is on the drawing, so i will change that so as if they were connected like 1 resistor together.

i will also change the 1uf cap to a 0.1uf cap, this will be done within a few hours.

i have tested at the schottkeys and results are as follows,

from top to bottom (the line is facing the right hand side)


silver jack plug) 1.2v
silver lamp) 0v

zapper jack plug) 0v

i find these readings quite peculiar, i assume that number three is not working correct and i will change that 1 only.

we ill get there in the end lol.

Let me know what u think.



Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!


Donate to CureZone

CureZone Newsletter is distributed in partnership with

Contact Us - Advertise - Stats

Copyright 1999 - 2023

22.359 sec, (1)