CureZone   Log On   Join
DIY Atmospheric Water Generator
  Views: 5,545
Published: 9 years ago

DIY Atmospheric Water Generator

I just finished making a DIY atmospheric water generator and it works very well. I bought a new Kolin KDM-18 dehumidifier I then took off covers and rinse it thoroughly with clean water. I wiped it and dried it with lint free clothes.

I installed a 1/2 inch hose and ran the water into a 6 stage filter system. First a ceramic filter, then a silver carbon filter, then a WSM-300 antibac filter, then a Silica sand filter, then a Zeolite filter, and then a mineral sand filter.

I am thinking about adding a UV lamp to the storage area.

The system produces about 18liters a day

The water before the filters is 7.0pH after the filter it is 8.0pH.

All in all I the cost was around $450 and cost about 6cents US per hour to operate.

Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!


Donate to CureZone

CureZone Newsletter is distributed in partnership with

Contact Us - Advertise - Stats

Copyright 1999 - 2021

0.488 sec, (1)