CureZone   Log On   Join
its not oxygen, its not hydrogen, its both
trapper/kcmo Views: 703
Published: 31 months ago

its not oxygen, its not hydrogen, its both

58 ~ Breathing Brown's Gas (HHO) for Health
By George Wiseman, Fri, 2016-02-19 19:29

Eagle-Research eNotices

I'm SHOCKED how far the Orient is ahead of us with using BG for Health.

For example: EPOCH ENERGY TECHNOLOGY located in Taiwan, has successfully developed Brown's Gas for Health businesses.
Here's a video of a walk-in clinic (not in English but you'll get the idea)

The video is a Taiwan local news interview of EPOCH commercialized products.
Anyone can step in for a BG treatment, easy as getting a cup of coffee.

Over the years I've breathed BG many times (pure Brown's Gas is absolutely non-toxic) but have recommended not breathing BG because it's explosive...
The above video reminded me that if you mix the BG with enough air, BG becomes NON-explosive!

I didn't think NOT breathing BG was that big of a deal because BG (particularly the hydrogen) does go through the skin OK, but the lungs are 'designed' to get gasses into the blood stream so are the most efficient delivery of BG into the body. You get a LOT more effective treatment using a lot less gas, and I'm all for efficiency!

That video caused me to totally reverse my recommendation about breathing BG.
I'll tell you WHY.

In the past I've always said that it's a bad idea to inhale an explosive gas into your lungs; and I still think that's true, IF the gas is explosive.
BUT there is a way to breathe BG safely as a NON-explosive gas... by mixing it with air!

If you mix BG with enough air, the volume of hydrogen falls below the lower ignition limit and the BG becomes NON-explosive and you STILL get all the wonderful health effects!
There is no question that, even though BG can enter the body (get into the blood) through the skin, it is MUCH more effective to get into the blood via the lungs.

There are THREE important aspects to consider when breathing Brown's Gas (BG or HHO):

First, there MAY be a tiny bit of lye mist in the BG, this can cause a painful kind of pneumonia. I had it happen to me in my early breathing experiments (1996).

To prevent that, use two bubblers (or you can use oxygen humidifiers) in series so that the BG flows through water twice before you breathe it; to be SURE there is no lye in the BG. Here's a quick video showing how to build two bubblers in a few minutes for less than $10. This is even safer than the Epoch method of using only one bubbler.

Water absorbs (scrubs) any residual lye so the BG is fresh and clean. I recommend changing the water in both bubblers (humidifiers) after each hour of electrolyzer use.
It's best to use distilled or de Ionized Water so you won't be inhaling chlorine and other gasses often found in tap water.
If you use pure water and your electrolyzer isn't tossing out foam, there's no reason you couldn't drink the BG bubbled water (so doing two techniques at one time). I drink my bubbler water and I give it to our cats.

If your electrolyzer is excessively foaming (which makes it inefficient and can spit out lye with your BG) then you can use this VACUUM technique to suck out the foam.

Second, When water is 'split' in the ER50, the 'new' oxygen formed is very 'active' (high oxidative potential) and feels harsh if you breathe it directly. Fortunately, bubbling the BG through water 'smooths out' that harshness so it's literally BETTER than a breath of fresh air!

Third, to be SURE that the BG is NON-explosive, don't use too much!

Let's do some quick math (you can skip this for now if you wish):
If you breathe (normal adult resting) 5 liters/minute of air = 300 liters/hour

and hydrogen lower combustion limit is 4%

and BG is 2/3 hydrogen and 1/3 oxygen, (we ignore the oxygen for this calculation)

(300 L/h * 0.04 = 12 L/h) (12000 mL/60=200 mL/m) 20/(2/3)=300 mL/m
So I can have up to 300 milliliters/minute (18 liters/hour) of BG and still be in the safe (non-combustible) zone.

So I adjust the capacitance of the ER50 to limit the gas production. At 120 VAC, 60 Hz and with 80 uF of capacitance, the ER50 produces 50 liters/hour of BG.
So to produce 18 liters per hour, I'd use about 30 uF of capacitance. I recommend oil-filled 'motor run' capacitors and you can pick them up at surplus prices online.

Another great side effect of this ER50 modification/application is that you'll only be drawing about 0.5 amp DC, which means that it'll take a lot longer for the ER50 to get too hot, if it ever does. The ER50 can then be operated (in clinics, etc.) for long periods of time without supplementary cooling.

Also, I note my 'Goat Logic' applies here (and I see Epoch did that).
It takes 5 goats to equal the milk production of 1 cow. But if that one cow gets sick you lose ALL of your production. If you have 5 goats, you can have some of them not in production (for various reasons) and still have milk (besides I prefer goat milk).
OK, I wasn't always an inventor, I grew up on a cattle ranch and after agriculture college I had a 60 head goat herd (my cattle ranching Dad wasn't impressed); but that is another life and story.

So... In this case, having several ER50 is much better than having one ER1200. They are easily portable and each 'health station' can have it's own unit.
You can also have a couple of spare ER50's to trade out when any need maintenance.
If you need more gas production, it is also perfectly acceptable to combine two or more ER50s.

I know that there are at least three clinics that are now using ER50 technology to treat their patients and ALL report good results. I hope to get permission to provide you with details. The nice thing about the ER50 is that you can get these results AT HOME!

Since I've again started experimenting with breathing the Brown's Gas I was amazed at how much energy it gave me (revved me up so much I had trouble sleeping) and it helped clear gunk from my lungs that I didn't even know was there. I have several other health benefits too, but my wife told me not to report them publicly because MY testimony is not credible (I have a Vested Interest in you buying my machines).

My advice, if you breathe BG, is to start slow (10 minutes a day, increasing 5 minutes each day) to let your body get used to it. Also, it's more effective to spread the minutes out over the day (like 3 of 10 minute treatments) rather than 1 of 30 minute treatment... Another good reason to have your own machine. I've now worked up to where I can do a couple of hours at one time without feeling hyper-alert (buzzing).

Another advantage is the Brown's Gas contains TWICE as much hydrogen as oxygen
(and a special form of water I call Electrically Expanded Water (ExW)).

Hydrogen could be called the element closest to GOD, being the smallest and simplest physical atom and comprising most of the known Universe. It's my opinion (based on transmutation research) that EVERYTHING is made from hydrogen.

Our bodies (like the Universe) are mostly hydrogen by volume.
and hydrogen is essential to most of the body's thousands of chemical processes.

Our bodies NEED hydrogen (both in elemental and ion form) but there's a catch... Hydrogen is NOT easy to get! Hydrogen attaches itself to other atoms to make all kinds of different molecules. So our bodies have developed the ability to get hydrogen by splitting molecules!
The most common reaction is between Carbonic acid and the hydrogen and bicarbonate ions
• CO2 + H2O --> H2CO3 --> H+ + HCO3¯
The point is that as we age and when we are sick, our bodies have less ability (both lack of energy and impaired 'splitting' mechanisms) to 'get' the hydrogen that we NEED to heal and stay healthy!

Enter Brown's Gas!
By breathing the hydrogen and oxygen (and ExW) we give the body a chance to acquire ALL these essential life supporting elements without having to spend energy (we may not have) AND we bypass potentially impaired 'splitting' mechanisms!

It's my opinion that Brown's Gas would also help healthy bodies STAY WELL!
Of course living a healthy lifestyle is also essential :)

For those people who have already assembled their ER50, you can order oxygen humidifiers and nasal cannulas to experiment with breathing the BG as per the Oriental clinics.

Oxygen humidifiers (example 1) (example 2) Or Build your own!
and nasal cannulas (example 1) (example 2)
You'll also need to order a special oxygen fitting to connect your 1/4" ID vinyl hoses to the oxygen humidifier:

As I've said, I've breathed pure BG from a 3000 L/hr electrolyzer with no issue
(pure BG will even make a squeaky voice (like helium) when in the lungs).
However, I still Do Not recommend breathing Brown's Gas undiluted; if you do so, you do it at your own risk!
It's my understanding (from Yull Brown's literature) that the US Navy tested BG as an underwater breathing gas. I don't know if they are actually using it.

Here is me, breathing BG from my personal ER50. It is set to 18 liters/hour for my breathing.
I've now moved it and set it up so I can do a BG treatment when working on my computer or watching TV.

Note: If you (or a family member) are on oxygen already (bottled or concentrator) then you can Tee in the Brown's Gas and get a hydrogen health boost at the same time. Adding hydrogen will NOT make the oxygen explosive, if you stay below the ignition limit.

It's still OK to bag your arm/leg/etc. Here's a young woman getting an effective treatment for her Carpal Tunnel.
I hope this information helps you apply BG to yourself, your family and friends for health and prosperity.

For those guys that would like a little more reason to buy an ER50 electrolyzer (or for ladies that want that SPECIAL gift ((fun toy) for their Guy)... Here are a couple of videos I whipped together, first showing BG lead-free soldering and then silver soldering. The ER50 (with the WaterTorch upgrade) can do pretty much anything a larger WaterTorch can do, it's just slower.
The tiny, laser like flame is QUITE powerful! Brown's Gas is also safer than other torch-fuels, homemade (you can service it yourself), creates the BG on demand (no storage bottles), is inexpensive (to build and operate), able to do highly accurate torch work (preferred by jewelers), etc.

Make your guy the envy of his friends :) Buy him a simple, efficient, practical, fun ER50 Kit NOW!

Download Patrick Kelly's most recent version FREE ENERGY document. Can spend HOURS getting informed!


Printer-friendly version of this page Email this message to a friend
Alert Moderators
Report Spam or bad message  Alert Moderators on This GOOD Message

This Forum message belongs to a larger discussion thread. See the complete thread below. You can reply to this message!


Donate to CureZone

CureZone Newsletter is distributed in partnership with

Contact Us - Advertise - Stats

Copyright 1999 - 2021

0.793 sec, (6)