burn at bottom of glass 
jman2007
14 y
1,669
Remove Mucoid Plaque
Remove the black gunk now with organic herbs and clay.
Cloves & Wormwood
Hulda Clark Cleanses
anyone keep finding a burn at the bottom of the glass where the rod would be if it touched? this is new.- Re: burn at bottom of glass gemini2810
14 y
1,602
MoreThis is a reply to # 1,725,669Hi jman:
I can get you a better answer tomorrow of what it is technically. But for now know that you need to keep your wires about a 1.5 inches at least from the bottom of the glass.
Warmly,
Vicki- Re: burn at bottom of glass jman2007
14 y
1,701
Remove Mucoid Plaque
Remove the black gunk now with organic herbs and clay.
Cloves & Wormwood
Hulda Clark Cleanses
- Re: burn at bottom of glass gemini2810
14 y
1,712
Remove Mucoid Plaque
Remove the black gunk now with organic herbs and clay.
Cloves & Wormwood
Hulda Clark Cleanses
This is a reply to # 1,726,506Advertisement
J.Crow’s® Lugol’s Iodine
Free S&H.Restore lost reserves.J.CROW’S®Lugol’s Iodine Solution
Sorry for the delay in responding.
The glass is electrostatic and somewhat porous in nature. This means it attracts some of the silver fromt the wires. It is called "plating out."
It does not affect the quality of the ionic silver you are producing or the ppm. You can clean this black off, but it isn't necessary. I usually just make sure the wires are at least 1-2 inches from the bottom, and if black appears I simply clean it after I have made my batch.
cheers, Vicki
- Re: burn at bottom of glass gemini2810
14 y
1,712
- Re: burn at bottom of glass jman2007
14 y
1,701
- Re: burn at bottom of glass gemini2810
14 y
1,602
fetched in 0.5938 sec, IP =172.70.100.160, y=1